Under power-lock, the set will not enter power saving when no PC signal and neither not turn off when no other video signals after 15 minutes. Can not be unlocked by reset in OSD settingĥ. The SET_POWER on/off should be workable via RS-232, but does not mean the POWER lock will be released under this case.ģ. Alternative approach will be indicated separately if any limitation by model.ġ. The Factory and Hospitality modes should not be blocked for the model using MENU-combined key to enter these two modes. All the SET functions should be workable via RS-232, even the ones with according hot key in RCU like Mute,…etc.ġ.
Lock all buttons on the front panel and RCU, except for “Power”Ģ.
Pass through: Display will bypass the RC code to connected device via the RS-232 port, but not react itself.
For Android platform whose main mode is controlled by backlight and the other sources are controlled by brightness. For the case of two more same sources, the 2nd digital is used to indicate the extension.ġ.
“WOL by MAC address” may available as alternative.*3.2.1Ģ. The Power-on via LAN control may works only under specific mode. NOTE: When PC applies command to all displays (ID=99), only the #1 set needs to reply by the name of ID=1.Įxample 1: Set Brightness as 76 for Display (#02) and this command is valid.Įxample 2: Set Brightness as 75 for Display (#02) and this command is NOT valid.ġ. Set-Function Format Send: (Command Type="s") Name Three bytes ASCII that defines the value. The LFD ID can be set via the OSD menu for each Display.įunction command code: One byte ASCII code. Under such circumstances, only ID#1 display has to reply.
ID “99” means to apply the set command for all connected displays. Identification for each of Display (01~98 default is 01) The Set-Function packet format consists of 9 bytes. The Set-Function command allows you to control the Display behavior at a remote site through the RS-232 port. The PC can control the Display for specific actions.
Serial interface used for mutual transfer of data between devices. High definition input connect to PC with HDMI output, set-top box, or other video device. Automatically switches between PC and Android.